Working Principle of Cone Crusher:
Cone crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone of the cone crusher is supported by spherical bearing and fixed on a hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fabricated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole; consequently the output size is determined.
Main technical parameters:
|
Type |
Diameter
(mm) |
Max feed size(mm) |
Adjusting range of output(mm) |
Capacity
(t/h) |
Motor
(kw) |
Frequency of main shaft |
Weight（t） |
Dimension
(L×W×H) |
|
PYB |
600 |
600 |
65
35 |
12-25 |
40 |
30 |
356 |
5 |
2234×1370×1675 |
|
PYD |
3-13 |
12-23 |
5.5 |
2234×1370×1675 |
|
PYB |
900 |
900 |
115
60
50 |
15-50 |
50-90 |
55 |
333 |
11.2 |
2692×1640×2350 |
|
PYZ |
5-20 |
20-65 |
11.2 |
2692×1640×2350 |
|
PYD |
3-13 |
15-50 |
11.3 |
2692×1640×2350 |
|
PYB |
1200 |
1200 |
145
100
50 |
20-50 |
110-168 |
110 |
300 |
24.7 |
2790×1878×2844 |
|
PYZ |
8-25 |
42-135 |
25 |
2790×1878×2844 |
|
PYD |
3-15 |
18-105 |
25.3 |
2790×1878×2844 |
|
PYB |
1750 |
1750 |
215
185
85 |
25-50 |
280-480 |
160 |
245 |
50.3 |
3910×2894×3809 |
|
PYZ |
10-30 |
115-320 |
50.3 |
3910×2894×3809 |
|
PYD |
5-13 |
75-230 |
50.2 |
3910×2894×3809 |
|
PYB |
2200 |
2200 |
300
230
100 |
30-60 |
59-1000 |
280-260 |
220 |
80 |
4622×3302×4470 |
|
PYZ |
10-30 |
200-580 |
80 |
4622×3302×4470 |
|
PYD |
5-15 |
120-340 |
81.4 |
4622×3302×4470 |
Any technical changes shall not go with another notice. |
